Flopro Easy Reel Complete Hose Set 20m
Flopro Easy Reel Complete Hose Set 20m
Flopro Easy Reel Complete Hose Set 20m
Flopro Easy Reel Complete Hose Set 20m

Flopro Easy Reel Complete Hose Set 20m

UV resistant hose
  • Complete hose set-The ultimate in watering convenience
  • 20 metres in length and includes a nozzle and connectors
  • Connectors allow a snap fit to all watering brands
  • Can be wall mounted or free standing
  • Designed to ensure the hose does not twist or kink when winding

Product options:

Item: 160921
Flopro Easy Reel Complete Hose Set 20m - Item: 160921
RRP £46.99
Save: £5.00 - 10%
Key Points
Full Product Details

Product Information

This Flopro Easy Reel Complete Hose Set is a portable, multi-purpose hose for general watering. It comes with connectors as well as a nozzle inside the reel which is ready to assemble. Choose how you want to use your reel; you can wall mount or also leave freestanding. Furthermore, the connectors allow a snap-fit to all watering brands.

With 3 layers it provides the quality as well as flexibility needed for all watering tasks too.

  • This Flopro Easy Hose Reel 20m Set Includes
  • 20m Hose
  • Dual Fit Outside Tap Connector (1/2' & 3/4')
  • Hose Connector
  • Water Stop Hose Connector
  • Watering Nozzle
  • Reel Features
  • Wall mounted or freestanding
  • Large capacity holds up to 45m of 12.5mm hosepipe
  • Designed to ensure the hose does not twist or kink when winding


  • Hose Features
  • Flexible
  • UV resistant
  • Pressure: up to 20 bar
  • Temperature range: -5/+45C
  • Hose Specification
  • Hose Length: 20m
  • Diameter of Connectors and Nozzle: 12.5mm / 1/2
  • Diameter of Tap Adapter: 19mm (3/4') with 12.5mm (1/2') insert


How to Use
This Flopro Classic Hose Reel comes ready to use. It can be used wall mounted or freestanding

To use

Remove the entire hose from the reel and remove all fittings from inside the drum
To add the hose to the reel. simply unscrew the inlet cap and place over the hose
Push the spring into the hose as far as it will go, and push the hose into the inlet firmly. Then re-tighten the cap. Ensure the connection is as tight as possible
Cut a length of hose to create a leader hose to connect the reel to your tap, approx. 1.5m and attach a hose connector to each end
Add a water stop hose connector (the connector with the pin as it ensure an automatic cut off of water when you disconnect a nozzle) and nozzle to the end of the main hose
Run water through the hose to ensure all connections are secure. Finally wind the main length of the hose back onto the hose reel
Attaching the reel to the wall

It is easier to attach the reel to the wall before winding on the hose
Please ensure the reel is positioned close to the tap, to a maximum suggested distance of 1m
You will need a drill, screwdriver and spirit level

Using the reel framework as a template and the spirit level to ensure the reel is straight, mark the wall through the screw holes in the framework
Drill the wall in the identified positions
Place the reel onto the wall and fix in place using 4 x 5cm (L) x 5mm (Dia.) screws
Wind on the hose

Items You May Like
Close Video
1. If you're not totally happy with your order, return it within 30 days and we'll replace or refund in full!
2. Should any hardy plant fail to thrive thereafter, we'll replace free of charge - you just pay the P&P
Item Added To Basket
Item Added To Basket